How to Install a 1st-Generation Ring Video Doorbell
Ring Video Doorbell is a fantastic home security device that allows you to keep tabs on your home from any location. With advanced features like motion detection and video capability, the Ring Video Doorbell has become a popular choice for homeowners looking for an added layer of security. However, if you’re new to the world of home security tech, then you might be daunted by the installation process. In this article, we’ll walk you through the step-by-step process of installing a 1st-generation Ring Video Doorbell.
Step 1: Charge your Ring Doorbell
Before you start, make sure your Ring Video Doorbell is fully charged. If it’s not, then you’ll need to charge it up using the provided charging cable. The Ring Doorbell should come with a micro-USB cable, which you’ll need to connect to a power source. A fully charged Ring Doorbell can last for up to six months (depending on the usage), so it’s recommended to charge it fully before installation.
Step 2: Download the Ring app
Next, you’ll need to download the Ring app on your smartphone or tablet. You can download the app from the App Store (for iOS devices) and Google Play Store (for Android devices). Once you’ve downloaded the app, you’ll need to create an account and log in to get started.
Step 3: Remove your old doorbell
If you have an existing wired doorbell, then you’ll need to remove it before installing the Ring Doorbell. Make sure to turn off the power supply before removing the old doorbell.
Step 4: Install the Ring Mounting Bracket
After removing the old doorbell, you’ll need to install the Ring mounting bracket. The bracket comes with screws and anchors, and you’ll need to attach it to the wall using the screws and anchors provided. Make sure your Ring Doorbell’s charging port is on the lower side of the bracket.
Step 5: Connect the wires
In this step, you’ll need to connect the wires to the back of the Ring Doorbell. The doorbell should come with a wiring harness that you’ll need to plug in. The wiring harness will provide two wires – red and white. Connect the red wire to the terminal labeled “TRANS” and the white wire to the terminal labeled “FRT”.
Step 6: Attach the Ring Doorbell
Once you’ve connected the wires, you’ll need to attach the Ring Doorbell to the mounting bracket. The Ring Doorbell should slide onto the bracket and click into place.
Step 7: Power on and configure
Finally, you’ll need to power on the Ring Doorbell and configure it using the Ring app. The app will guide you through the setup process, which includes connecting your Ring Doorbell to your Wi-Fi network, setting up a Ring account, and customizing your settings.
With these simple steps, you’ll be able to install your 1st-generation Ring Video Doorbell and enjoy added peace of mind knowing that your home is secure. The installation process should take around 20-30 minutes, and if you get stuck, refer to the user manual or reach out to Ring’s customer support. Stay safe!