How to Do a Burnout: 9 Steps
Burnouts are a thrilling stunt where you spin your car’s tires, creating smoke, noise, and leaving rubber behind. This guide will walk you through the process of performing a burnout and give you the essential safety measures to follow while doing so. Before attempting any stunts, it is important to be familiar with the risks and be prepared for possible consequences.
1. Choose the right location: Find an open and flat area, such as empty parking lots or unused roads, free from vehicular and pedestrian traffic. Avoid public streets or crowded places to minimize potential accidents.
2. Decide your method: Depending on your car type (manual or automatic transmission), choose between a stationary burnout (car remains in one spot) or rolling burnout (car moves forward during the stunt).
3. Disable traction control and any other safety aids: These systems may interfere with a burnout. Consult your car’s owner’s manual on how to disable them.
4. Wear protective gear: For added safety, wear a helmet and gloves while performing a burnout.
5. Warm up the tires: Tires with some heat in them will produce more smoke. You can warm up your tires by driving around for a few minutes before attempting the stunt.
6. Perform the burnout:
– For manual transmission:
A. Press the clutch pedal and engage first gear.
B. Rev the engine while holding both brake and clutch pedals firmly.
C. Release the clutch rapidly, keeping your foot on the brake pedal.
D. Apply more throttle if needed until you see smoke coming from your tires.
– For automatic transmission:
A. Shift into drive.
B. Hold down both brake and gas pedals simultaneously.
C. Gradually increase pressure on the gas pedal until you see smoke from your tires.
7. Control during burnout: To ensure a smooth burnout, keep a stable hand on the steering wheel and maintain a steady throttle input. If you lose control, immediately release the throttle and brake.
8. Watch your surroundings: While performing the stunt, be vigilant of your environment and be ready to stop if any obstacles or hazards appear.
9. Stopping the burnout: To end the burnout, release the gas pedal and gradually apply the brakes.
By following these nine steps, you can create an impressive burnout. Remember to always prioritize safety and practice responsible driving habits. Performing a burnout can result in tire wear, increased fuel consumption, and potential damage to your car’s drivetrain. Be fully aware of these consequences before attempting this stunt.