Step 1: Choose a design

Before starting, choose a design or create one yourself. Consider the size, complexity, and placement of the tattoo on your body.

Step 2: Gather your materials

Purchase a Jagua tattoo kit online or from a specialized retailer. The kit should include the Jagua gel, applicator bottles, and tips. You might also want gloves, stencil paper, rubbing alcohol, and cotton pads to apply your design properly.

Step 3: Prepare the skin

Clean the area where you plan to apply the tattoo with rubbing alcohol and a cotton pad. This will remove any oils, dirt, or lotions that may hinder the transfer of the design onto your skin.

Step 4: Create or transfer the stencil

If you have chosen a pre-made design, transfer it onto stencil paper. If creating your own design, draw it directly onto the stencil paper. Make sure to use appropriate art supplies for this step.

Step 5: Apply the stencil

Cut around your stencil and use stencil adhesive to stick it securely onto your skin.

Step 6: Prepare the Jagua gel

Following the instructions provided with your kit, mix the Jagua powder into distilled water until you achieve a smooth gel consistency.

Step 7: Fill applicator bottle

Fill an applicator bottle with Jagua gel. Attach an appropriately sized nozzle tip for your desired line thickness.

Step 8: Begin applying Jagua tattoo gel

Hold the applicator bottle at a 45-degree angle to your skin and gently squeeze to apply Jagua gel over your stencil lines. Make sure not to press the nozzle tip directly onto your skin at this point.

Step 9: Work slowly and steadily

Take your time when applying the gel, being cautious not to smudge or spread it out too much. It is essential for precision work in more complicated designs.

Step 10: Pause and observe

Every few minutes, pause to assess your work. Check for any inconsistencies or missed areas, making sure to address them before the gel dries.

Step 11: Remove the stencil

Once you have traced your entire design with Jagua gel, carefully and slowly peel off the stencil from your skin.

Step 12: Let the gel dry

Allow the Jagua gel to dry on your skin for at least two hours. The longer you let it dry, the darker the tattoo will be. Avoid touching or smudging the design during this time.

Step 13: Rinse off dried Jagua gel

After the drying period, gently rinse off the dried Jagua gel under cool running water. Make sure not to rub or scrub your new tattoo – a gentle stream of water should remove the dried gel completely.

Step 14: Care for your new tattoo

Keep your new Jagua tattoo moisturized and avoid exposing it to direct sunlight for prolonged periods. The tattoo should last between one and three weeks, depending on how well you care for it.

And there you have it! By following these 14 steps, you can create beautiful and lasting Jagua tattoos on your own. Enjoy experimenting with different designs and techniques as you become more comfortable with applying Jagua tattoos.