If you’re having trouble with your Wemo Plug, one of the first things you might want to try is resetting it. There are a few different methods you can use to reset a Wemo Plug, so keep reading to learn how to do it.

Method 1: Resetting Using the Wemo App

1. Open the Wemo app on your smartphone.

2. Tap on the specific Wemo Plug in question.

3. Tap on the three dots in the upper right-hand corner of the screen.

4. Tap “Edit Device”he.

5. Scroll down and tap “Reset Device”.

6. Follow the on-screen instructions to complete t reset process.

If you followed these steps correctly, you should have successfully reset your Wemo Plug.

Method 2: Resetting Using the Wemo Button

1. Locate the Wemo button on the back of the Wemo Plug.

2. Hold down the button for approximately 10 seconds until the LED light on the Plug begins to flash.

3. Release the button.

4. Wait for the Plug to reset itself.

5. Once the LED stops flashing, the Plug has been reset.

Method 3: Resetting Using the Wemo Insight Switch

If you have a Wemo Insight Switch, you can use this method to reset your Wemo Plug.

1. Plug your Wemo Insight Switch into an outlet.

2. Hold down the power button on the Switch for approximately 10 seconds until the LED light turns orange.

3. Release the button.

4. Wait for the LED light on the Switch to turn solid green.

5. The Switch has been reset, and any Wemo Plugs connected to it have been reset as well.

In Conclusion

Resetting a Wemo Plug is a simple process. Whether you choose to reset using the Wemo app, button, or Insight Switch, following the correct steps should result in a successful reset. Remember, resetting a Wemo Plug will erase all associated settings and data, so you’ll need to set it up again in order to use it.