Introduction

Spooling new fishing line onto a reel is an essential skill that every angler should know. It not only ensures the smooth functioning of your reel but also extends the life of your fishing gear. In this article, we will explore three different methods to spool new fishing line onto a reel so you can choose the one that works best for you.

1. The Pencil Method

This method involves using a pencil or any other similar object as an axis around which to wrap the new fishing line. Follow these steps:

1. Securely fasten one end of the fishing line to the reel.

2. Insert a pencil through the hole in the center of the line spool and ask someone to hold it horizontally.

3. Hold the reel handle and start winding, ensuring that the line comes off the spool in smooth coils.

4. Apply consistent pressure with your fingers to ensure even distribution of the line on the reel.

5. Fill up about 1/8 inch below the outer lip of the spool and cut off any excess line.

2. The Stationary Spool Method

This method is suitable for spooling spinning reels and does not require any additional assistance. Follow these steps:

1. Attach one end of the fishing line to your reel using an arbor knot.

2. Place the line spool at a flat surface with its label face up so that it doesn’t unravel as you wind it onto your reel.

3. Apply pressure on the rod while winding to maintain appropriate tension, ensuring even distribution on your reel.

4. As with the pencil method, fill up about 1/8 inch below the outer lip of the spool and cut off any excess line.

3. The Reel Fill Device (Line Winder) Method

A Reel Fill Device, also known as a line winder, is an effective tool in spooling your new fishing line. It is particularly useful when dealing with large spools or when you don’t have assistance.

1. Attach one end of your fishing line to the reel with an arbor knot.

2. Put the line spool onto the line winder and adjust its tension as needed.

3. Begin winding the line onto your reel, maintaining consistent pressure throughout the process.

4. Fill up about 1/8 inch below the outer lip of the spool and cut off any excess line.

Conclusion

Knowing how to correctly spool new fishing line onto a reel is crucial for a successful day on the water. Choose from one of these three methods and ensure that your gear is always in optimal condition for your next fishing adventure.