Are you facing the issue of your Windows 10 laptop battery not charging? If the answer is yes, then you are not alone in this. Many users have reported this problem, but fortunately, there are some simple fixes that you can try to resolve the issue.

Check Your Power Adapter

The first and most obvious step is to check your power adapter. Sometimes, the battery may not charge due to a faulty power adapter. Inspect the adapter and make sure that there are no defects or damage to the cord. If there is any damage, you may need to replace the adapter.

Clean the Charging Port and Battery Contacts

The charging port and battery contacts may become dirty over time, which can cause charging issues. Use a cotton swab or a soft-bristled brush to carefully clean the port and the contacts. This will ensure proper connection and, in turn, will allow the battery to charge efficiently.

Disable Battery Driver

One of the reasons why you may face charging issues with your Windows laptop is a faulty battery driver. In such cases, disabling the driver can fix the issue. To disable the driver, follow these steps:

1. Go to the Start menu and type “Device Manager” in the search bar.

2. Expand “Batteries” and “Microsoft ACPI-Compliant Control Method Battery.”

3. Right-click on the Battery and then click “Disable device.”

4. Restart the laptop to apply the changes.

5. Enable the installation of the battery driver by following the same steps and clicking “Enable Device.”

Update Your Battery Driver

If disabling didn’t solve the issue, you may need to update your battery driver. An outdated battery driver may cause issues with the charging process. Follow these steps to update the battery driver:

1. Go to the “Device Manager” again.

2. Expand “Batteries” and “Microsoft ACPI-Compliant Control Method Battery.”

3. Right-click on the Battery and then click “Update driver.”

4. Windows will search and install the appropriate driver automatically.

5. After installing, restart your laptop to apply the changes.

Reset Power Management System

Sometimes, the Power Management System settings may be the culprit behind the battery not charging issue. Resetting the Power Management System may fix the problem. To reset the power management system, follow these steps:

1. Turn off your laptop.

2. Disconnect the power adapter and remove the battery.

3. Press and hold the power button for 30 seconds.

4. Reinsert the battery and connect the adapter.

5. Turn on the laptop and check if the battery is charging.

Conclusion

Battery not charging issues with your Windows 10 laptop is a common problem that many users face. However, there are many ways to resolve the issue quickly. We hope that the solutions provided in this article will help you to get your battery charging back to normal.