3 Ways to Calibrate the Gyroscope on a Galaxy Device
Gyroscopes are essential components of smartphones, as they provide accurate motion tracking for multiple applications, such as gaming, navigation, and photography. However, the gyroscope in your Samsung Galaxy device may occasionally require calibration to ensure top performance. Here are three ways to calibrate the gyroscope on a Galaxy phone.
1. Manual Calibration using a Code
Step 1: Open your Phone app and enter the following code: *#0*#. This will open the Service Mode menu.
Step 2: Tap on “Sensor,” which will lead you to another menu displaying various sensor options.
Step 3: Scroll down and find the “Gyroscope Sensor” option. Tapping it will show two buttons: “Display” and “Calibrate.”
Step 4: Place your Galaxy device on a flat surface before pressing the “Calibrate” button. Wait for a few seconds until you see the message “Calibration Complete.” You can then check if the gyroscope works correctly by monitoring the recorded values as you move your device.
2. Calibration Using Apps
The Google Play Store offers numerous free apps designed to calibrate your device’s gyroscope easily. One recommended option is “Gyroscope Calibration.”
Step 1: Download and install “Gyroscope Calibration” from the Google Play Store.
Step 2: Launch the app and follow its prompts to calibrate your device.
Step 3: After completing calibration, test your gyroscope by tilting or rotating your device to ensure smooth functioning.
3. Factory Reset (if all else fails)
If none of the above methods work, you can perform a factory reset on your Galaxy smartphone. However, this method should only be used as a last resort, since it will erase all your data and restore your device to its original settings.
To perform a factory reset:
Step 1: Backup all essential data, including contacts, messages, media files, and app settings.
Step 2: Go to “Settings” > “General Management” > “Reset” > “Factory Data Reset.”
Step 3: Scroll down and tap on “Reset,” then enter your password or pin to confirm the action.
Step 4: The device will reboot and erase all data and settings before restoring the original factory conditions. You will need to set up your device again, and once completed, check if the gyroscope is working correctly.
By using any of these methods, you can ensure that the gyroscope on your Samsung Galaxy device is calibrated correctly to keep your device running smoothly and accurately.