3 Simple Ways to Reset a Ninja Coffee Bar
A perfect cup of coffee can be a great way to start your day. Having a Ninja Coffee Bar at home ensures that you can enjoy your favorite coffee drinks anytime. However, like any other electrical appliance, it might sometimes need a reset to function correctly. If you’re experiencing issues with your Ninja Coffee Bar, try these three simple methods to reset it and get back to brewing delicious coffee.
1. Soft Reset:
A soft reset is the easiest way to reset your Ninja Coffee Bar. It is often effective in resolving minor issues, such as the “Clean” light remaining lit even after cleaning.
Step 1: Unplug your Ninja Coffee Bar from the wall outlet.
Step 2: Wait for about 5 minutes to allow the appliance to cool down.
Step 3: Plug the coffee maker back into the wall outlet.
Step 4: Restart the coffee maker by turning it on.
After performing these steps, your Ninja Coffee Bar should be functioning normally again.
2. Hard Reset:
If a soft reset does not resolve the issue, you may need to perform a hard reset. This method clears deeper-set configurations and restores your machine to its factory settings.
Step 1: Unplug your Ninja Coffee Bar from the wall outlet.
Step 2: Remove the water reservoir and empty it completely.
Step 3: Press and hold both the “Brew” and “Delay Brew” buttons simultaneously while plugging in the coffee maker.
Step 4: Continue holding both buttons until all lights on the control panel flash, and then release them.
Step 5: Reattach and refill the water reservoir.
Your machine should now be in its default settings, ready for use.
3. Resetting After Descaling:
The “Clean” light is designed to remind you when it’s time to descale your Ninja Coffee Bar, which is essential for maintaining its performance and lifespan. After descaling, it may be necessary to reset the machine to clear the reminder.
Step 1: Ensure that your Ninja Coffee Bar is turned off and unplugged from the wall outlet.
Step 2: Fill the water reservoir with fresh water up to the maximum capacity.
Step 3: Press and hold the “Clean” button.
Step 4: While still holding the “Clean” button, plug the machine back into the wall outlet and turn it on.
Step 5: Release the “Clean” button when all lights on the control panel flash.
The “Clean” light should now be off, signifying that you have successfully reset your Ninja Coffee Bar after descaling.
By following these simple methods, you can easily reset your Ninja Coffee Bar. Resetting your coffee maker can help resolve any issues or ensure that your machine is ready for use after maintenance. With your Ninja Coffee Bar back in action, you can enjoy freshly brewed coffee all day long.