The Singer Simple 3116 is a popular sewing machine known for its user-friendly features and versatility. Threading this sewing machine is an essential skill for any sewist, whether you’re a seasoned pro or just starting out. In this article, we will guide you through the process of threading your Singer Simple 3116, ensuring your sewing experience goes smoothly and efficiently.

Step 1: Prepare Your Sewing Machine

Before you begin threading your Singer Simple 3116, make sure it is powered off and unplugged, to prevent any accidental needle movements or injuries. Place the sewing machine on a stable, well-lit surface to provide ample workspace.

Step 2: Wind the Bobbin

With the sewing machine off, insert an empty bobbin onto the bobbin winding spindle. Pass the thread through the bobbin winding tension disc and around the bobbin in a clockwise direction. Hold onto the loose end of the thread and press down on the foot pedal, allowing the bobbin to wind evenly with thread. Once fully wound, cut the thread, remove the bobbin from the spindle, and place it aside for later use.

Step 3: Load the Upper Thread

To load the upper threading system, first place your spool of thread on the spool pin located at the top of your sewing machine. Next, pull the end of the thread and pass it through the first thread guide (usually a small hook or loop) on top of your machine. Continue pulling it down through any subsequent thread guides until you reach a metal tension disc or set of tension discs.

Step 4: Thread Tension Discs and Take-up Lever

Slip your thread between these tension discs by following their natural curvature. After passing through both discs, pull up on your thread to ensure it’s properly secured in place. Locate your take-up lever, a vertically moving part with an eyelet. Thread the thread through the eyelet from right to left.

Step 5: Complete Upper Threading

Continue guiding the thread downwards, passing through any remaining thread guides. Lastly, thread it through the needle from front to back. If necessary, use a needle threader or a pair of tweezers to help with this task.

Step 6: Load the Bobbin

Open the bobbin cover located on the front of your machine and place the wound bobbin in its compartment, ensuring that it’s rotating in a counterclockwise direction. Hold down on the bobbin gently while guiding its thread upwards in a clockwise direction towards a small groove or slot. Pull the end of the thread through this slot and close the bobbin cover.

Step 7: Draw Up Lower Thread

Hold your upper thread securely as you slowly use your hand wheel to lower and then raise your needle. As you do this, a loop of lower (bobbin) thread will appear. Pull on your upper thread gently to bring this loop fully upwards, thus completing the threading process.

Step 8: Begin Sewing

Once both upper and lower threads are fully threaded, cut off any excess thread tails, plug in your sewing machine and power it on. You’re now ready to begin sewing with your perfectly threaded Singer Simple 3116.

By following these step-by-step instructions, you’ll be able to quickly and easily thread your Singer Simple 3116 sewing machine every time. This will allow you to focus on creating beautiful projects without any frustration or interruptions caused by improper threading!