How to Shorten Shoe Laces: 11 Steps
Shoe laces that are too long can be annoying and even pose a tripping hazard. Follow these simple steps to shorten your shoe laces easily and effectively.
1. Measure the desired length: Put on the shoe and lace it up as you normally would. Make sure it’s snug and comfortable, then measure the excess lace that you want to remove.
2. Mark where to cut: Use a non-permanent marker or a covered safety pin to mark the spot where you want to cut the laces.
3. Remove the laces: Take off your shoe and remove the laces carefully.
4. Cut the desired length: Using sharp scissors, cut carefully at the marked spot on each lace. Make sure to work slowly and precisely so that you don’t accidentally cut too much.
5. Melt the ends (optional): To prevent fraying, carefully use a lighter or matches to slightly melt the ends of your laces. Be cautious not to burn yourself or damage your laces further.
6. Re-lace your shoes: Reinsert your shortened laces into your shoes, making sure both sides are of equal length when finished.
7. Secure with an aglet (optional): Purchase or create small plastic aglet caps that can be crimped onto the ends of your cut laces to protect them from damage and provide a clean finish.
8. Tie a new knot: Tie a new knot in each of your trimmed laces to help prevent them from coming loose during wear.
9. Test for comfort: Put on your shoes and walk around for a bit to ensure that your shortened laces still provide adequate support and stay securely fastened.
10. Adjust as needed: If necessary, re-cut, re-melt, or reattach aglets until you achieve your desired length and comfort.
11. Store for future use (optional): If you cut off a significant amount of excess length, consider keeping the extra pieces for future use, such as tying smaller knots or using them as replacement laces should your current ones become damaged.
By following these steps, you’ll enjoy manageable shoe laces that look neat and keep you safe.