Introduction:

Curtain lining tape adds an extra layer of protection to your curtains while also enhancing their overall look and functionality. Sewing curtain lining tape may seem like a daunting task, but with a little patience and the right technique, anyone can do it! Here’s a 12-step guide to help you successfully sew curtain lining tape to your curtains.

Step 1: Gather Your Supplies

To begin, gather the necessary supplies for this project. You’ll need:

– Curtains

– Curtain lining tape

– Thread that matches your curtain fabric

– Sewing machine or needle & thread for hand-sewing

– Scissors

– Pins

– Measuring tape or ruler

Step 2: Measure Your Curtains

Measure the width and length of your curtains to determine how much lining tape you’ll need. It’s always a good idea to slightly overestimate, as you can trim the excess later.

Step 3: Cut the Lining Tape

Cut the lining tape according to the measurements taken in step 2. Make sure you have clean, straight edges by using sharp scissors.

Step 4: Pin the Lining Tape

Lay your curtains flat with the right side facing down. Place the curtain lining tape on top of the wrong side (back) of the curtains, aligning it with the top edge. Pin the tape in place, keeping it taut and straight.

Step 5: Fold Under Edges

Before sewing, fold under a small section (about 0.5-inch or 1 cm) of both ends of the curtain lining tape. This will give your finished curtains a cleaner look as it hides any raw edges.

Step 6: Sew The Lining Tape (First Row)

Using your sewing machine or hand-stitching method, sew along the top edge of the curtain lining tape, removing the pins as you go. Make sure your stitches are straight and even.

Step 7: Space for the Hooks

Curtain lining tape typically has a row of pockets to insert curtain hooks. Make sure you leave enough space above the sewn line for the hooks to fit securely.

Step 8: Sew The Lining Tape (Second Row)

Now sew a straight line along the bottom edge of the pocket openings in the curtain lining tape, maintaining an even stitch tension.

Step 9: Drawstrings

Some curtain lining tapes come with drawstrings that help to create pleats or gathers in your curtains. If your tape has drawstrings, ensure that they are not caught in your stitches.

Step 10: Secure the Ends of Lining Tape

Using a sewing machine or hand-stitching method, secure both ends of your curtain lining tape by sewing across it. This will prevent fraying and keep your tape in place.

Step 11: Trim Excess Fabric

After sewing on the curtain lining tape, you may have excess fabric at the top of your curtains. Trim off any excess fabric carefully, without cutting into the lining tape stitches.

Step 12: Attach Curtain Hooks

Finally, insert curtain hooks into the pockets or loops of your newly sewn curtain lining tape. Your lined curtains are now ready to be hung!

Conclusion:

Sewing curtain lining tape onto your curtains may require some time and patience, but it’s an excellent way to enhance their look and functionality. By following these 12 easy steps, you can achieve a professional finish for your curtains that will transform any room in your home. Happy sewing!