How to Measure Wheel Offset: 7 Steps
The wheel offset is an essential factor to consider when selecting new wheels for your vehicle. It ensures proper fitment and clearance, helps maintain the handling, and prevents damage to suspension components. But how do you measure wheel offset? In this article, we will share seven steps to accurately measure and understand wheel offset.
1. Gather Necessary Tools
To measure wheel offset, you’ll need a straight edge (ruler or metal level), a measuring tape, and a square or parallel block to help you obtain accurate measurements. You may also require paper, a pen, and a calculator.
2. Understand Wheel Offset Definition
Wheel offset is the distance between the hub mounting surface (where the wheel bolts onto the vehicle) and the wheel’s exact centerline. It can be positive (outward), negative (inward), or zero (flushed) and is usually measured in millimeters.
3. Set Up Your Workspace
Find a clean and flat surface to work on, preferably a floor or large table. Place your wheel with the face down on the ground or table surface. Ensure the hub mounting surface is pointing upwards.
4. Determine Wheel Centerline
Using your measuring tape, find the total width of your wheel from outside lip to outside lip in inches. Divide this number by two to calculate your wheel centerline in inches.
5. Measure Hub Mounting Surface Distance
Position the straight edge across the hub mounting surface, ensuring it is level with the ground or table surface. Place a square or parallel block at one end of the straight edge to hold it into place securely.
6. Measure Distance from Centerline
Using a measuring tape or ruler, measure the distance from your established centerline (as found in step 4) to the hub mounting surface where the straight edge lies in inches.
7. Convert your Measurement into Millimeters and Determine Wheel Offset
Convert the measured distance in inches to millimeters by multiplying the value by 25.4. The resulting number is your wheel offset in millimeters. A positive offset means that the mounting surface is farther away from the wheel centerline (towards the wheel face), while a negative offset indicates that it is closer to the centerline (towards the vehicle).
In conclusion, measuring wheel offset involves finding the wheel centerline, hub mounting surface distance, and converting your measurements to determine wheel fitment accurately. By following these seven steps, you can confidently choose suitable wheels for your vehicle without ripping any suspension or fender components.