A doorstop is a simple, yet essential accessory that can protect your walls and furniture from damage due to doorknobs or doors slamming open. Installing a doorstop is an easy DIY task that requires minimal tools and effort. Here are 9 steps to help you through the process:

Step 1: Choose the Right Doorstop

Doorstops come in various styles and materials such as wedge-shaped, magnetic, hinge-mounted, and wall-mounted. Evaluate your needs and select the most suitable doorstop for your doors.

Step 2: Gather Your Tools

To install your chosen doorstop, you will need some basic tools such as a drill, drill bits, screwdriver, tape measure, pencil or marker, and possibly some wall anchors (for wall-mounted doorstops).

Step 3: Determine the Doorstop Location

Measure the distance between the baseboard and the door handle or edge to find the appropriate location for your doorstop. For wall-mounted types, mark where you want the stopper to be attached.

Step 4: Mark the Installation Points

Using a pencil or marker, mark the spot(s) where you will install the doorstop. For hinge-mounted doorstops, mark the location on the hinge. For wall-mounted ones, mark both the baseboard and wall.

Step 5: Choose an Appropriate Drill Bit

Select a drill bit size that corresponds to the screws provided with your doorstop or one slightly smaller than their diameter.

Step 6: Drill Pilot Holes

Drill pilot holes in marked locations so that it is easier to screw in the hardware. For wall-mounted doorstops, ensure you are drilling into the studs for more secure installation; if not possible, utilize wall anchors.

Step 7: Install Wall-Mounted Doorstops

If installing a wall-mounted doorstop, proceed by attaching it using provided screws or those you have purchased. Fasten the base to the baseboard or wall first and then screw in the stopper piece.

Step 8: Install Hinge-Mounted Doorstops

For hinge-mounted doorstops, attach them directly to the hinge pin by removing the pin, sliding the doorstop onto it, and replacing the pin in its original position.

Step 9: Test the Doorstop

Once installed, test your doorstop to ensure it is functioning properly. Open and close the door slowly several times to gauge if the stopper is adequately preventing damage.

And that’s it! With these simple steps, you can now protect your walls and furniture from potential damage caused by opening doors too forcefully. Enjoy your newly installed doorstop!