4 Best Ways to Configure RAID 1 on Windows 11

Protecting your data is paramount, and setting up RAID 1 is one of the best ways to ensure your files remain safe in the event of a drive failure. RAID 1, also known as disk mirroring, duplicates your data across two or more disks for high data availability. If you’re using Windows 11 and looking to configure RAID 1, it’s essential that you do it correctly to ensure maximum data protection. Here are the best four methods to set up RAID 1 on your Windows 11 system.
Method 1: Using Disk Management
The Disk Management tool that’s built into Windows 11 is the most straightforward method to set up a RAID 1 array without additional software:
1.Press `WIN + X` and select ‘Disk Management’.
2.Right-click on an unallocated disk space and choose ‘New Mirrored Volume’.
3.Follow the wizard by selecting another disk for the mirror and finalizing the setup.
4.Once completed, Windows will create a RAID 1 mirror for you.
This method does not require any special hardware or software and is ideal for users who prefer using native Windows tools.
Method 2: Through Storage Spaces
Storage Spaces is another built-in feature of Windows that provides more flexibility than Disk Management:
1.Search for ‘Storage Spaces’ from the Start menu and open it.
2.Click on “Create a new pool and storage space.”
3.Select the drives you want to include in the pool and click ‘Create pool’.
4.Choose ‘Two-way mirror’ which is equivalent to RAID 1 and decide on the drive letter and size.
Finish by creating the storage space.
Storage Spaces not only allows you to configure RAID 1 but also offers options like drives’ redundancy for increased data protection.
Method 3: Using Command Prompt
More advanced users can use Command Prompt with DiskPart utility:
1.Launch Command Prompt as an administrator.
2.Enter `diskpart` to start the utility.
3.Use `list disk` to view all drives, `select disk X` (where X is your disk number), and `convert dynamic` on both disks you wish to mirror.
4.Create a mirrored volume with `create volume mirror`.
This method should be used by those who are comfortable with command-line interfaces and have a clear understanding of DiskPart commands.
Method 4: Hardware-Based RAID Controller
A hardware-based approach involves using a dedicated RAID controller card:
1.Install a RAID controller card into your PCI-E slot.
2.Boot into the controller’s BIOS setup during system startup (usually by pressing `CTRL + H` or similar).
3.Use the BIOS menu to create a new RAID array, selecting RAID 1 as type.
4.Assign disks to the array following on-screen prompts.
While this method requires purchasing additional hardware, it often provides better performance and leaves system resources free for other tasks.
Conclusion
Choosing between these methods depends on your specific needs, expertise level, and whether you are willing to purchase additional hardware for optimal performance. When in doubt, consult with an IT professional who can recommend the best solution tailored specifically for your system’s configuration and requirements.