3 Ways to Make a Water Gun with a Water Bottle
![](https://www.thetechedvocate.org/wp-content/uploads/2024/02/v4-460px-Make-a-Water-Gun-with-a-Water-Bottle-Step-8.jpg.webp)
Are you looking for a fun, eco-friendly summer activity? Why not transform an ordinary water bottle into an exciting homemade water gun? Not only will this provide hours of entertainment, but it’s also an excellent way to upcycle and repurpose those old water bottles. In this article, we’ll explore three simple methods to create your very own water gun using a water bottle.
1. The Straw Shooter
Materials:
– Empty plastic water bottle
– Straw
– Scissors
– Waterproof tape
Instructions:
Step 1: Begin by removing the cap from the water bottle and setting it aside.
Step 2: Take the straw and cut it at an angle so that one end is pointed.
Step 3: Insert the pointed end of the straw into the water bottle, making sure it reaches the bottom of the bottle.
Step 4: Using waterproof tape, secure the straw onto the mouth of the water bottle, ensuring that it’s tightly sealed and doesn’t allow any water to leak out.
Step 5: Fill your makeshift water gun with water using a sink or hose until it reaches your desired level.
To use your straw shooter, simply squeeze the sides of the water bottle hard enough to force the water out through the straw and watch as it sprays your target.
2. The Balloon Blaster
Materials:
– Empty plastic water bottle
– Balloon
– Scissors
– Waterproof tape
Instructions:
Step 1: Cut off the neck of a balloon with scissors.
Step 2: Stretch out the balloon and securely wrap its open end around the mouth of the empty water bottle using waterproof tape.
Step 3: Twist off your homemade nozzle (the top part of the balloon) while holding onto its knot.
Step 4: Fill up your Balloon Blaster by submerging its nozzle in a bucket or sink filled with water.
Step 5: Release your grip on the nozzle to allow water to flow into the bottle.
To use the Balloon Blaster, aim at your target and squeeze the body of the bottle while holding onto the nozzle. The water will rapidly shoot out in a strong stream.
3. The Pull-back Pumper
Materials:
– Empty plastic water bottle
– Thin flexible tube
– String or elastic cord
– Scissors
– Waterproof tape
Instructions:
Step 1: Pierce a hole at the center of the cap using scissors or another sharp object.
Step 2: Thread one end of the tube through the hole until it reaches about halfway down the bottle.
Step 3: Using waterproof tape, secure the tube inside and outside of the cap so it stays in place.
Step 4: Fill your water bottle with water, ensuring that a portion of the tube remains submerged under water.
Step 5: Tie a string or elastic cord to both ends of the flexible tube sticking out from the cap.
When you are ready to use this Pull-back Pumper, pull back on both sides of the string/elastic cord simultaneously while aiming at your target. The pressure created inside will force water to shoot out from the exposed end of the tube.
Final Thoughts
There you have it! Three easy, DIY methods to create water guns from nothing more than a simple water bottle. These eco-friendly homemade toys not only promote sustainability but also guarantee hours of endless summer fun. So gather up those old water bottles and start experimenting with these creative designs – just remember to stay safe and enjoy responsibly.