3 Ways to Lower a Varidesk
Introduction
Standing desks, such as the popular Varidesk, have been gaining immense popularity over the years, thanks to their ergonomic benefits and customized workstation configurations. While raising your desk height is relatively easy, lowering it can cause some confusion. This article will provide you with three simple ways to lower a VariDesk.
1. Using the Lever Mechanism
One of the most common ways to lower a VariDesk is by using the built-in lever mechanism on specific models such as the Pro Plus series. Here’s how:
Step 1: Stand in front of your VariDesk and locate the lever handles on each side of the desk.
Step 2: Grasp both handles simultaneously. Make sure you have a firm grip on each handle.
Step 3: Apply gentle pressure to push both handles downwards while maintaining an even and stable force.
Step 4: Slowly lower the desk to your desired height. Take your time during this step to prevent sudden drops or accidents.
Step 5: Once you’ve achieved your preferred height, release both handles so that they lock into place and secure the desk.
2. Adjusting the Counterbalance Tension
If you have a VariDesk model equipped with an adjustable counterbalance tension feature, such as an Electric Pro Plus model, you can also use that method to lower your standing desk. Follow these steps:
Step 1: Turn off any power supply connected to your VariDesk.
Step 2: Locate the counterbalance tension knob, typically found at either side of the desk base or underneath the work surface.
Step 3: Before adjusting the tension knob, check if it’s tight enough by lifting or lowering your VariDesk slightly. If it rises or lowers too easily or with difficulty, adjust accordingly.
Step 4: To lower your VariDesk, turn the counterbalance tension knob counterclockwise, reducing the tension. You may need to use a tool, such as an Allen wrench, provided with the desk.
Step 5: Once the tension is properly adjusted, test your VariDesk by raising and lowering it a few times to ensure smooth movement.
3. Manually Lowering Specific Models
Some VariDesk models, such as the Compact series or Petite Electric models, don’t come with built-in lever mechanisms or adjustable counterbalance tensions. To lower these models, follow these steps:
Step 1: Unplug any power supply connected to your VariDesk.
Step 2: Locate the locking pins or brackets holding the desk in its current position.
Step 3: Carefully disengage the pins or brackets and firmly hold onto your VariDesk’s work surface to prevent it from dropping suddenly.
Step 4: Slowly lower your work surface to your desired height by manually guiding it down.
Step 5: Re-engage the locking pins or brackets once you’ve achieved your preferred height.
Conclusion
Lowering a Varidesk can be done quickly and efficiently by following these three methods. Whether you have a model with a lever mechanism, adjustable counterbalance tension, or must manually lower it, this guide will help you create an ergonomic and comfortable workspace that suits your needs.