Introduction:

Oakley sunglasses are known for their durability, high-quality lenses, and stylish designs. To ensure your Oakleys provide clear vision and maintain their optimal performance, it’s important to clean them regularly. Here are three different methods to clean Oakley lenses and frames, keeping them in top condition.

Method 1: Using Microfiber Cloth and Lens Cleaning Solution

1.Use a microfiber cloth: Microfiber cloths are designed to effectively pick up and trap dirt, oil, and smudges without scratching the lens surface. Make sure your cloth is clean before using it on the lenses.

2.Apply a lens cleaning solution: You can use a commercially available lens cleaning solution or make your own by mixing one part white vinegar with three parts distilled water. Spray the solution onto the microfiber cloth.

3.Wipe the lenses gently: Using the dampened cloth, wipe the lenses in a circular motion, working from the center outward. This will help remove any dirt or smudges without causing streaks.

Method 2: Cleaning with Mild Dish Soap and Water

1.Rinse under lukewarm water: Hold your Oakley sunglasses under running lukewarm water to remove any loose particles of dust or dirt that may be present on the frame or lenses.

2.Add mild dish soap: Put a drop of mild dish soap on your fingertips and gently rub it into the wet lenses and frames.

3.Rinse thoroughly: Once you’ve rubbed the soap into all parts of your sunglasses, rinse them under lukewarm water again until all soap residue is gone.

4.Dry with a microfiber cloth: Gently wipe the lenses and frames dry using a clean microfiber cloth to prevent streaks and lint.

Method 3: Ultrasonic Cleaning

1.Invest in an ultrasonic cleaner: If you own multiple pairs of sunglasses or have particularly stubborn dirt, consider purchasing an ultrasonic cleaner designed for eyewear.

2.Fill the cleaner: Fill the ultrasonic cleaner with water and a gentle cleaning solution. Make sure your Oakleys are fully submerged.

3.Run the cleaner: Turn on your ultrasonic cleaner and let it run for the recommended time, usually around 5-10 minutes.

4.Rinse and dry: After the cleaning cycle, rinse your Oakleys under running water to remove any leftover cleaning solution. Dry them with a microfiber cloth.

Conclusion:

By using these three methods, you can keep your Oakley lenses and frames clean and in optimal condition, ensuring clear vision and long-lasting durability. Make sure to clean your sunglasses regularly and store them in their protective case when not in use to extend their lifespan.