1. Identify the problem:

The first step in fixing a broken iPhone charger cable is to identify the problem. Typically, broken cables have one or more of the following issues: fraying, exposed wires, broken connector, or a loose connection.

2. Unplug the charger:

Ensure your iPhone charger is unplugged from any power source before repairing it. This will prevent any electrical risks or injuries.

3. Remove the damaged part:

Identify the damaged part of the cable and then cut it off with a sharp knife. Try to make sure that you only cut off the damaged portion and still have enough length of cable for charging.

4. Strip the wires:

Using wire strippers, strip away the plastic coating around the ends of the wires that you just cut. Remove only the amount needed to expose enough wire to twist or solder.

5. Twist the wires:

Twist the exposed wires together and make sure they are straight and tight. If there are multiple wires, make sure that they correspond with their respective color and arrangement.

6. Solder or Tape:

To fix the broken iPhone charger cable, you can choose either to solder or tape the wires. If you have the knowledge and expertise to solder, it is better to go for it as it will give a better hold and connection. However, if you don’t have that expertise, you can use electrical tape as it also provides sufficient insulation.

7. Cover with insulation:

Once you’ve joined the wires, cover them with insulation. You can use either heat shrink tubing or electrical tape to insulate the wire. Make sure that the insulation is tight and secure.

8. Test the charger:

After you’re done, plug the charger into a power source and check if it is working efficiently. If the charger is not working properly, go back and check that all the wires are arranged correctly and insulated appropriately.